What should you check when buying a used car?
Check the paperwork first (the VIN, the title and a vehicle history report), then the body and paint, under the hood, a cold start, the interior and electrics, the tires and brakes, a test drive, leaks afterwards, the underside and any stored trouble codes. A pre-purchase inspection by a qualified mechanic is still worth getting.
The checklist above covers each of these areas in that order, with OK, Fix or Walk away for every item.
What should be on a used car buying checklist?
A used car buying checklist covers three stages: research before you go, a careful inspection and test drive at the car, and a last look at the price before you pay. The inspection checklist on this page covers the middle stage.
Before you go
- Set your budget and the most you will pay. The free max offer calculator works it out from the retail price, your profit target, repairs and fees.
- Look at comparable listings for the same year, model, trim and mileage.
- Ask the seller for the VIN and pull a vehicle history report.
- Plan to see the car in daylight with a cold engine, and bring a flashlight, a tread-depth gauge and a basic OBD-II reader.
At the car
- Work through the inspection: documents and VIN, body, under the hood, cold start, interior, tires and brakes, test drive, leaks, underneath and scan codes.
- Mark anything that needs work as Fix, with a rough cost if you have one.
Before you pay
- Add up the repairs and check your price again: take them off your offer, or walk away.
- If anything is unclear, get a pre-purchase inspection by a qualified mechanic.
- Check that the documents you are given match the car and its VIN.
Keep this used car checklist open on your phone, or print it and take it with you.
How do you use this checklist?
Go through the sections in order and mark each item OK, Fix or Walk away, adding a note where something needs a closer look. Start with the paperwork, so you don't spend an hour on a car whose VIN or title doesn't add up.
Look over the body and under the hood before the engine has been run, start it cold, and finish with the test drive, a look for leaks and a scan for codes.
- Print it, or open this page on your phone. On screen, your choices are saved only in this browser.
- For each item, mark Checked once you have looked, then choose OK, Fix or Walk away.
- When you mark an item Fix, add an estimated cost if you have one. The summary at the end adds them up.
- Turn that figure into a price with the free max offer calculator.
A flashlight, a tread-depth gauge, a basic OBD-II reader and a rag make the job easier.
Which problems are deal-breakers, and which can you price in?
Treat expensive or hidden problems as possible deal-breakers: a VIN or title that doesn't match, flood signs, frame damage, engine knock or a slipping transmission. Price in fixable problems, such as tires, brakes, glass, A/C or a missing key, by estimating the repair and taking it off your offer.
The hint on each item is a starting point, not a verdict:
- Deal-breaker? marks items that often point to expensive or hidden trouble: a VIN or title that doesn't match, signs of flood water, frame damage, an engine that knocks, a transmission that slips, or codes that look recently cleared. The question mark is deliberate. Some buyers walk away; others price it in, depending on the car and the price.
- Price it in marks things that cost money but are usually fixable: worn tires, tired brakes, chipped glass, weak A/C, a missing key. Estimate the cost and take it off what you are willing to pay.
Mark an item Fix when you would still buy the car at a lower price, and Walk away when no price would make it worth it to you.
What should you check on a test drive?
Drive long enough to reach normal temperature, including some highway speed, and check that the car tracks straight, shifts smoothly, doesn't vibrate or clunk, and keeps a steady temperature gauge with no warning lights.
With the radio off, pay attention to:
- Steering: the car tracks straight with the wheel centred, and doesn't pull to one side under braking.
- Shifting: smooth changes, with no slipping, flaring revs or harsh clunks.
- Vibration: any shake through the wheel or the seat at speed or when braking.
- Noises: clunks over bumps, or a whine or hum that rises with speed.
- Gauges: a steady temperature reading and no warning lights.
Afterwards, park on a clean, dry spot for a few minutes and look underneath for fresh drips.
Frequently asked questions
Can I print this checklist?
Yes. Use the Print button or your browser's print command. It prints on US Letter paper in black and white, without the rest of the website, and any choices you made on screen print as filled boxes.
Are my answers saved?
Only in this browser, on this device. Nothing is sent to CarFlip or anyone else. Use Clear all to delete them.
Does this checklist replace a mechanic's inspection?
No. It helps you look carefully, but it does not replace an inspection by a qualified mechanic. When in doubt, get a pre-purchase inspection.
Is this an official vehicle inspection form?
No. It is a car inspection checklist for buyers deciding whether a used car is worth the price. It is not a state safety or emissions inspection form, and it does not replace an inspection by a qualified mechanic.
What tools do I need?
A flashlight for looking underneath, a tread-depth gauge for the tires and a basic OBD-II reader for trouble codes. The rest is looking, listening and asking questions.